Skip to content

Setting the system hostname

The default hostname is zsd-master for the master host and is zsd-delegate for delegate hosts. To change the default hostname, perform this procedure.

  1. Gain access to the Control Center host, through the console interface of your hypervisor, or through a remote shell utility such as PuTTY.

  2. In the Appliance Administration menu, select Configure Network and DNS, and then press Enter. This step starts the NetworkManager TUI.

  3. Display the hostname entry field.

    1. In the NetworkManager TUI menu, select Set system hostname.
    2. Select OK, and then press Enter.
  4. In the Hostname field, enter the hostname or a fully-qualified domain name.

  5. Press Tab twice to select OK, and then press Enter.

  6. In the confirmation dialog box, press Enter.

  7. On the NetworkManager TUI screen, select Quit, and then press Enter. This step returns control to the Appliance Administration menu.
  8. Reboot the operating system as follows:
    1. In the Appliance Administration menu, select Reboot / Poweroff System.
    2. Select Reboot.
    3. Select OK, and then press Enter.